I bought the Alesis Control Hub with dual ts cables to dual ts cables and hooked the interface up to my monitors and some of the noise was reduced but still there!!! I was extremely frustrated. I then thought it was an interference problem within my computer so I decided to buy a bus powered audio interface. After doing extensive amounts of research I came across people properly grounding their motherboards to their computers chassis by scraping the paint off the motherboard screws and PSU screws, I did this and the noise was slightly reduced, but still there, and still too loud and annoying. The noise was still there! Even if I disabled the HDMI audio! The noise would only go away if I disconnected the HDMI from my display. I connected the 3.5mm Jack into my display and used my graphics cards audio through HDMI.
The noise would still be present even if my computer's volume was 0. It sounded like EMI or like radio interference. It was not a 60hz hum but a high pitch whine that fluctuated continuously with a weird buzz in the background.
The buzzing and whining started instantly as I turned my PC on. I know that I am answering my own question but I really wanted to help people out there with the same problem! To start off I was using a 3.5mm jack to dual ts jack cable, I connected the monitors (JBL lsr305) directly into my onboard soundcard.
